hostleisure.blogg.se - N1mm logger plus spectrum display setup

#N1mm logger plus spectrum display setup how to#
#N1mm logger plus spectrum display setup install#
#N1mm logger plus spectrum display setup driver#
#N1mm logger plus spectrum display setup windows 10#

Thanks for watching! Please like, subscribe and share!ĭISCLAIMER: This description may contain affiliate links, which means that if you click on one of the product links, I may receive a small commission. I hope to inspire people to get involved in Amateur Radio.įor parts and equipment I use, please visit my website ► On my YouTube channel I upload videos mostly on the Icom 7300 and Icom 7610 as well as Ham Radio software programs. I love the hobby and experimenting with radios, antennas and software. I decided to set up the basic settings needed to allow WSJT-X to work with N1MM+ first and import my 'everyday' settings later. To see how N1MM is setup take a look at this post: ICOM 7300 N1MM LOGGER PLUS SETUP. It will be published on July 8, 2017.ĭo you have a panadapter using HDSDR? How is it working for you? N1MM+ Logger Quick Tutorial Load N1MM+ free logging program. See my website for the article and hardware I used. N1MM+ is not a general-purpose logger there is no. If a contest is not supported now, it can usually be added using the Loggers 'user-defined contest' feature. N1MM Logger+ (aka N1MM+) is free contesting software that supports virtually all amateur radio contests. Download EXT_IO.dll and copy to the HDSDR folder. The official platform for discussing the N1MM Logger Plus contest logging program.

#N1mm logger plus spectrum display setup install#

Download and install HDSDR and Omnirig.ģ.

#N1mm logger plus spectrum display setup driver#

Download Zadig and install the driver for your SDR. I had to stop the video and go with Omnirig because I did not get CAT to HDSDR working at the time of the recording.ġ.

#N1mm logger plus spectrum display setup windows 10#

I wanted to get this right so I bought a new computer (new to me) and installed a fresh copy of Windows 10 Pro. Verify the SDR you are installing a driver for. See the video below for a visual.CAUTION: Use extreme caution when using Zadig. The Icom 7300 N1MM Logger should be displaying the radio frequency at the top of the window next to the icon. This guide is primarily for those who are not familiar with N1MM Logger+ but are.

#N1mm logger plus spectrum display setup how to#

Also, instructions are included in how to use both 2Tone and Gritty as receive-only decoders. Go back and verify the above settings and make sure your com ports are correct. This guide is for those who want to get up and running on RTTY quickly with N1MM Logger Plus using MMTTY as the main digital interface. If you do, something is not setup correctly.

Click OK to close the Configurer window.

Mine is DTR (pin 4)=CW, RTS (pin 7)=Always Off, Radio Nr=1, PTT Delay (msec)=30, Dig Wnd Nr=1, Allow ext interrupts and Winkey go UNchecked, Two Radio Protocol=None and Footswitch (pin 6)=None.

Next to that check Digi and also check CW/Other.

The next row under Port, choose the COM port your USB cable is connected to.

Footswitch (pin 6)=None and Radio Polling Rate=Normal. Mine is 9600, N, 8, 1, DTR (Pin4)=CW, RTS (pin 7)=PTT, Icom Code (hex)=94, Radio Nr=1, PTT Delay=30 and PTT via Radio Command SSB Mode is checked.

Make sure your Com port is setup correctly.

On the Hardware tab select the port that your CI-V cable is on and next to it choose the IC-7300 for the Radio.

Click on Config, then select Configure Ports, Mode Control, Audio, Other….

Step four, if you don’t already have it, download and install N1MM Logger+. It’s free and you can find it here. I have included a couple of extra settings that will help later on when using PSK31, RTTY (FSK) and CW keying. Set the following menu items under MENU>SET>Connectors. These are the changes, leave everything else to default settings. Step three, turn your radio on and setup the Icom 7300 using the radio’s menu. Do not connect the USB cable until you have downloaded and installed the driver.

Step one, if you haven’t already, download and install the USB driver from Icom for your Icom IC-7300. If you just want to use a USB Cable with HRD and operate some PSK31 or RTTY (AFSK), take a look at this video. I have found this to be the easiest, because later on I added cw keying and RTTY (FSK) to the mix. Use the CI-V for rig control and the USB for the soundcard. One is the USB cable connected to the radios USB port and the other is a CI-V cable connected to the radios CI-V port.